


















Why are People Choosing Professional Plumbing?








Condominium/Commercial:
Professional Plumbing & Design, Inc. can re-pipe your water system from top to bottom using SCH 40 Flow Guard Gold CPVC and SCH 80 Corzan CPVC. All repipes include fire protection, drywall replacement and texture to match.
Professional Plumbing & Design, Inc. is fully equipped to take care of any drain problem with our extensive line of drain cleaning machines, high-velocity water jetting, color cameras and locators. We do drainage stack replacements from top to bottom, including trenchless pipe lining under the slab and in walls without tearing up your floors and walls. Cracked and leaking drain lines are replaced with SCH 40 PVC pipe and insulated to avoid noise. All fire protection is brought up to code to give you superior protection compared to what you currently have. All drywall repairs are made so that you cannot tell we were there.








| Natural Gas | Replacing Electric with Gas | Replacing Gas with Gas |
| Tank Water Heating | $500 | $350 |
| Tankless Water Heating | $675 | $550 |
| Heating | $725 | $500 |
| Cooking | $200 | $100 |
| Clothes Drying | $150 | $100 |


“Now for only pennies a day, you can protect yourself from costly and annoying plumbing problems!”
Our Pro Club is for any of our clients who want front of the line service, free yearly safety inspections, 10% discounts on all repairs and replacements, 2-year guarantees on all repairs and replacements and all of this for free.
1) Front of the line service!
As a member of our “Pro Club” you will go to the front of the line and to the top of our appointment list whenever you need plumbing services.
2) Free Yearly Safety Inspection!
Once each year, one of our certified technicians will give your entire plumbing system a thorough safety inspection to make sure that everything is working properly and that there are no potential plumbing hazards.
3) 10% discount and 2 year guarantee on all repairs and replacements!
As a member of our “Pro Club” you'll receive a 10% discount and a 2-year guarantee on all repairs and replacements.
4) Membership Is Free!
Your low monthly accrued investment of only $4.95 can be put towards any service you need in the future. You can’t loose!
5) Inflation protection when you pay in advance.
1 year $ 59.40
2 years $118.80
3 years $178.20










How the Perma-Lateral Lining System™ Works
The Perma-Lateral System™ uses PVC coated polyester needle felt tube reinforced with a fiberglass scrim. The tubular material is impregnated with a two part 100% epoxy resin. This resin is designed specifically for
the Perma-Lateral System™. The impregnated tube is Inverted inside out, allowing the resin to bond and seal with the existing host. The PVC coating becomes the new jointless inner wall, from beginning to end, without joints. The flexible PVC coating allows the liner material to invert through 22's, 45's and sweeping 90-degree bends with ease.
Perma-Lateral Lining System™
The Perma-Lateral Sistem™ inversion unit does all the work. Your Installer calibrates the correct inversion pressure while the liner inverts Itself through the existing host pipe. A site window allows the Installer to watch the liner release into the host pipe and control the speed to ensure proper Installation.
Once the liner is inverted and holding pressure, the Installer attaches a special cap to hold pressure during
the curing time. The Perma-Lateral System™ Inversion unit is released and used for the next installation. The liner holding pressure is calibrated using a portable air tank.
Typical Installations
From house or building to mainline connection
From rooftop to basements in highrise buildings
Pipes beneath restaurant floors
Cast iron pipes missing the bottom portion
Under driveways, sidewalk and landscaping
Beneath apartment buildings and houses
Under railways and tunnels
Industrial plants, shopping centers and malls
Military bases and ships
Perma-Lateral™ System Benefits
• Eliminates Root Intrusion
• Stops Infiltration / Exfiltration
• Renews Pipe Life to Minimum 50 Years per ASTM 1216 Third Party Testing
• 22, 45 AND SWEEPING 90 DEGREE BENDS
• Stand Alone Design / No Host Pipe Needed
• Bridges Missing Sections of Pipe
• Relines Virtually Any Material - Clay, Cast, Etc.
• 2", 3", 4", 5", 6", 7" AND 8" Diameters Available
• IAPMO Approved
• NSF Standard 14 Certification



